Finishing Edges and Surfaces
These instructions are optional but make for a much nicer table. Using a rougher or a file round off the top edge of the rail. You wont see this but you will feel a sharp corner through the padding. Finish it off by sanding it smooth. You should do the outside edge but only need to sand the inside edge because your arms will not rest on the inside corner.
Now you want to use the real fine sand paper and sand the Veneer surface. Make sure that you get into the cup holders and that the edge of the speed track is smooth. I found it to be helpful to sand the inside of the table as well. The smooth surface made it easier to clean later when you want a dust free area.